problem with codes and resetting ecu
09 October 2011, 05:41 PM
#1
Scooby Regular
Thread Starter
Join Date: Jan 2007
Location: in the engine bay
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
problem with codes and resetting ecu
hi,
ive been trying to reset the ecu on a 95 wrx but when im driving around with the green and black plugs together on light throttle a few codes come on, i keep driving for about another 15-20 mins but no change, the codes are still there,
my question is, why dont the same codes come up when i connect just the black plugs?
thanks, phil.
ive been trying to reset the ecu on a 95 wrx but when im driving around with the green and black plugs together on light throttle a few codes come on, i keep driving for about another 15-20 mins but no change, the codes are still there,
my question is, why dont the same codes come up when i connect just the black plugs?
thanks, phil.
09 October 2011, 05:55 PM
#3
Scooby Regular
Thread Starter
Join Date: Jan 2007
Location: in the engine bay
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
09 October 2011, 07:30 PM
#6
Scooby Regular
Thread Starter
Join Date: Jan 2007
Location: in the engine bay
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
they are 32 and 43 i have a new o2 sensor and another throttle body switch (which has been set to the correct volts open and closed)
phil.
phil.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM