mitman2501

Hi every one I think my boost pips might be piped up wrong or some think not owned the car long but it's only boosting around 0.6 its a import wrx 95 reg if any one willing to have a look 4 me would be very great full

4evascoob

I had this problem, try taking pipes of solenoid and blowing through with aerasol brake cleaner, it worked a treat for me.

mitman2501

I tryed that mate cheers tho I sprayed brack cleaner throw it untill was clear the last owner put a 3 pin solenoid if that any sense think he may off piped it up wrong !

ukimpreza

iTrader: (9)

check to see if the restrictor pill is in the bottom hose on the 3 port as ( someone correct me if i'm wrong ) they wont boost over about 0.5 without it in.

joz8968

iTrader: (13)

* Above is the Subaru OEM 3-port - note connections.


* But if you have an after market 3-port, then connect as follows:-

"NO" (Normally Open)
Vac line from turbo compressor nozzle's nipple

"COM" (Common)
Vac line to wastegate actuator housing's nipple

"NC" (Normally Closed)
Vac line to OEM resonator box (or aftermarket resonator delete pipe or turbo intake hose - whatever you have on your car).
Or can be left VTA (but make sure the above mentioned intake port option is bunged up, if VTA).

mitman2501

Ukimprza you lost me sorry

Hammer man

iTrader: (25)

Try asking on the WMI thread (General). There should be somebody on there who could help you out.

mitman2501

Owwww my gOd just swapped the pips over running just under 1 bar @&£" me cheers joz ow u a few beers I think

joz8968

iTrader: (13)

I should have thought of that yesterday when you were asking!

And yep, circa <1.0 bar will be correct for a 260PS MY95 WRX.

You're all back to normal - does it feel transformed now?!

mitman2501

No worrys mate fuvkin crazy really happy now wish I didn't have them few beers tonight would off been out all night lol it's just boosting under 1 bar now will have a better look tomorrow so happy I could kiss u

joz8968

iTrader: (13)

Easy!