97-00 alloy bonnet on a MY94 car
#1
Scooby Regular
Thread Starter
Join Date: Mar 1999
Location: The Great White North
Posts: 25,080
Likes: 0
Received 0 Likes
on
0 Posts
Question for you all.
car is MY94 WRX Wagon, with a somewhat dented bonnet (as some will know)
Been offered a 97-00 alloy bonnet for a very, very good price.
Question is, what do I need to do to the car to get this to fit?
I know I'd need a new grill, but would a new grill be a direct slot in replacement for the old one? or is there black magic involved.
also, a more serious problem is the scoop, in that it's different (bigger?) on a later car, plus the IC on later cars is not angled, so what would need to be done to get the correct airflow?
car is MY94 WRX Wagon, with a somewhat dented bonnet (as some will know)
Been offered a 97-00 alloy bonnet for a very, very good price.
Question is, what do I need to do to the car to get this to fit?
I know I'd need a new grill, but would a new grill be a direct slot in replacement for the old one? or is there black magic involved.
also, a more serious problem is the scoop, in that it's different (bigger?) on a later car, plus the IC on later cars is not angled, so what would need to be done to get the correct airflow?
#2
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
Im fairly sure you need to change the lights as well.. (actually no you dont thinking about it as you have the newer morettes... it will just bolt on.. lower the bonnet down slowly or when they are both off the car compare them and then trim appropriately... maybe a good excuse to put a more efficient sti Intercooler on!
David
David
#4
Markus I read on another post (so not sure if this works) that someone had just transferred the plate from the underside of the old bonnet to the new bonnet, so that the air was still directed to the intercooler.
HTH ian
[Edited by ian/555 - 4/24/2002 6:02:41 PM]
HTH ian
[Edited by ian/555 - 4/24/2002 6:02:41 PM]
#5
Scooby Regular
Thread Starter
Join Date: Mar 1999
Location: The Great White North
Posts: 25,080
Likes: 0
Received 0 Likes
on
0 Posts
Thanks.
have spoken to a few people who said that the slant IC with newer bonnet should be ok anyway, so I might go that route. I'm still thinking about it though.
have spoken to a few people who said that the slant IC with newer bonnet should be ok anyway, so I might go that route. I'm still thinking about it though.
#6
Alternatly Mark.
STi Intercooler for sale
Not affeliated(sp?) etc...
I think I'd bolt the bonnet on and see how it lines up...
JGM
STi Intercooler for sale
Not affeliated(sp?) etc...
I think I'd bolt the bonnet on and see how it lines up...
JGM
#7
Scooby Regular
iTrader: (1)
Hi Markus,
I have a new shape bonnet on an early car. You need the bonnet. lights and grill. To duct the air to the intercooler i bodged together the new duct to the old duct (with a bit of aluminium thrown in) and it works perfectly. You wouldn't know it wasn't made that way.
I'll post some pictures of it tonight so you get a better idea of what i did.
Tony.
I have a new shape bonnet on an early car. You need the bonnet. lights and grill. To duct the air to the intercooler i bodged together the new duct to the old duct (with a bit of aluminium thrown in) and it works perfectly. You wouldn't know it wasn't made that way.
I'll post some pictures of it tonight so you get a better idea of what i did.
Tony.
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Mar 1999
Location: The Great White North
Posts: 25,080
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Tony.
i'd only need the grill, and scoop, as I have morettes, and the vents are not a problem as I'd get some of Stuart Knight's scoops to cover them
i'd only need the grill, and scoop, as I have morettes, and the vents are not a problem as I'd get some of Stuart Knight's scoops to cover them
#10
Markus,
If you go that route would you be interested in selling me your stuart knight scoops ?
I did look at this conversion but pulled away due to the intercooler, once I have the readys I'll do it but with a fmic & an oil cooler when the tmic currently is.
If you go that route would you be interested in selling me your stuart knight scoops ?
I did look at this conversion but pulled away due to the intercooler, once I have the readys I'll do it but with a fmic & an oil cooler when the tmic currently is.
#11
Scooby Regular
iTrader: (1)
Hi Markus sorry it took so long but here are my pictures (bit hard to see tho cos the bonnets black too).
Hope that helps, im sure if its done like i have there is no down side to having the new bonnet, the up side is it lokks soooo much better .
Tony.
[Edited by Tone Loc - 4/30/2002 12:55:03 PM]
Hope that helps, im sure if its done like i have there is no down side to having the new bonnet, the up side is it lokks soooo much better .
Tony.
[Edited by Tone Loc - 4/30/2002 12:55:03 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM