Area 52 exhaust manifold?
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jul 2011
Location: Lancaster
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
Area 52 exhaust manifold?
Hi guys, my car has an equal length manifold on which I thought was just going to be a cheap eBay manifold, turns out it's the £900 equal manifold scoobymania sell, do they produce good power ie is it worth keeping on the car, was going to go unequal but may change my mind if the manifold has been well designed for more power?
Thanks for any advice
Dave
Thanks for any advice
Dave
#3
Scooby Regular
iTrader: (7)
Hi there
What your current spec?
If you are all ready running the 400bhp+ i would go for proven GT Spec,RCM etc.
If you are under 400bhp i don't recommend go for any aftermarket headers,beware before ebay jobbies,they're are prone to crack.And with these headers under 400bhp you will loose spool too,i would recommend get your headers ported and you will gain BHP or you can contact here Harvey,which selling Ported headers which are proven with Harvey Up pipe you have nice combo which is hard to beat.
Jura
What your current spec?
If you are all ready running the 400bhp+ i would go for proven GT Spec,RCM etc.
If you are under 400bhp i don't recommend go for any aftermarket headers,beware before ebay jobbies,they're are prone to crack.And with these headers under 400bhp you will loose spool too,i would recommend get your headers ported and you will gain BHP or you can contact here Harvey,which selling Ported headers which are proven with Harvey Up pipe you have nice combo which is hard to beat.
Jura
#4
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jul 2011
Location: Lancaster
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for your input Jura, I wasn't saying I wanted an eBay manifold though I was asuming that my car had been fitted with one, but have found out it's the area 52 £900 small diameter equal length manifold that scoobymania sell, and wanted to know if it was worth keeping and whether they are a good manifold or not...
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM