Hi don't surpose anyone has pics of fitting a boost gauge to a new age. Have no idea but heard it's easy any advice

 

Bump

 

If you cant get any info m8 ill send you pics over wknd ill be fitting one ill take step by step pics and tell you how to plumb in it is easy enough. You need to know what line to t piece into though

 

No pics mate but see your rec valve on the topmount the hose on that you t-piece into that then run your hose off the boost gauge through the firewall below the master brake cylinder the for the wire use your *** lighter wires

 

Nice one that sounds good. Don't forget me. I will wait to fit it till I see pic cheers

 

Hi mate recently fitted mine. I put t peice 80mm down pipe that comes off d.v. subaru recommend this. Then run pipe to gauge round back off intercooler and through gromit in bulkhead. As for wiring i have mine pillar mounted so wired 2 fog switches. Hope this helps

 

Cheers guys

 

Is d v. Dump valve

 

Yes. Before T-ing into anything, check there isn't an unused nipple on the front of the manifold, covered in a rubber "boot". There was on my 98 car, it's what it's there for