perrin performance
#1
Scooby Regular
Thread Starter
iTrader: (11)
Join Date: Feb 2011
Location: Newcastle upon tyne
Posts: 2,750
Likes: 0
Received 0 Likes
on
0 Posts
perrin performance
hi guys , soon to be fitting ecutek to my hawkeye sti & ditching the 2.5" cat back ninja , your thoughts on this set up please perrin up pipe, single piece down pipe , equal lenth headers & ceramic coated stealth exhaust total price is £2493.79. so u see my need to ask ? serious cash for an exhaust set up / regards
#4
Scooby Regular
iTrader: (13)
£139 (+p&p) OEM ported uppipe from harvey
(Tell him your total spec and he'll advise on the optimal one to achieve the mods' potential bhp whilst retaining as quick spool as poss.)
<£80 true 3" bellmouth decat downpipe
c.£350 true 3" Revolution or Cobra or H&S system
Done.
(Tell him your total spec and he'll advise on the optimal one to achieve the mods' potential bhp whilst retaining as quick spool as poss.)
<£80 true 3" bellmouth decat downpipe
c.£350 true 3" Revolution or Cobra or H&S system
Done.
Last edited by joz8968; 02 August 2011 at 10:07 PM.
#5
Scooby Regular
Thread Starter
iTrader: (11)
Join Date: Feb 2011
Location: Newcastle upon tyne
Posts: 2,750
Likes: 0
Received 0 Likes
on
0 Posts
g7prs why not ? i want other upgrades on 2 < looking to get up to the 375 mark , that will be enough for me as dont want to go down the forged route . / in that case do you sugest i keep the ninja & forget the steallth as this will knock 1k of price?
#6
Mate that is crazy money for the level of power you are after! I have a blitz nur spec on my blobeye with a decat and it made 355 bhp. Now although this is on a two litre the system on mine would have been a fraction of the amount you have mentioned.
#7
Scooby Regular
Thread Starter
iTrader: (11)
Join Date: Feb 2011
Location: Newcastle upon tyne
Posts: 2,750
Likes: 0
Received 0 Likes
on
0 Posts
yea thanks joz , have spoken with revolution they also do downpies manifolds etc wich is fine , but im not 2 keen on there system as there manufactured by jetex , i had an issue with them about 10yrs back on a previous car ,, if you say jetex have improved there quality , cool
Trending Topics
#9
Speak to Harvey on here or which ever mapper / tuner you are planning on using to see what they advise.
I would go with a sports cat or decat, harvey up pipe, fuel pump and panel filter and then a remap.
I would go with a sports cat or decat, harvey up pipe, fuel pump and panel filter and then a remap.
#10
Scooby Regular
iTrader: (7)
hi guys , soon to be fitting ecutek to my hawkeye sti & ditching the 2.5" cat back ninja , your thoughts on this set up please perrin up pipe, single piece down pipe , equal lenth headers & ceramic coated stealth exhaust total price is £2493.79. so u see my need to ask ? serious cash for an exhaust set up / regards
Just for info:
DP:£160-£220
Center Pipe:£80-£150
Backbox: £160-£500
Headers:GT Spec from £445-£600
Up pipe i would suggest Harvey Up pipe,but my feeling you don't need Headers if you are want under 400bhp,headers are recommended if you are going for more than 400bhp+
Jura
#11
Scooby Regular
iTrader: (60)
Join Date: Apr 2010
Location: West Mids
Posts: 2,567
Likes: 0
Received 0 Likes
on
0 Posts
a 2.5" system is fine for 375 bhp and so are the standard headers.
So all you need is harvey's up pipe £139
Decat downpipe £150 -£220
Ecutek remap iirc £550
That's near enough £1500 less.
Although it's not essential, there are gains to be had from getting your headers ported by harvey.
So all you need is harvey's up pipe £139
Decat downpipe £150 -£220
Ecutek remap iirc £550
That's near enough £1500 less.
Although it's not essential, there are gains to be had from getting your headers ported by harvey.
#12
Scooby Regular
Thread Starter
iTrader: (11)
Join Date: Feb 2011
Location: Newcastle upon tyne
Posts: 2,750
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the replys all i fitted the walbro & panel filter last weekend ,just wasnt sure about the 2.5" staying on , it looks fine sounds ok , so i guess no need 2 change then. its just i keep hearing perrin are the dogs for scoobys from sway bars to headers , to pulleys etc etc ?
oh by way im from newcastle so will be goin with andy forrest for ecutek
i dont think he supplys & fits parts tho so will be finding & fitting products myself.
oh by way im from newcastle so will be goin with andy forrest for ecutek
i dont think he supplys & fits parts tho so will be finding & fitting products myself.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
jobegold@hotmail.co.uk
ScoobyNet General
2
27 September 2015 09:44 PM