forister

iTrader: (1)

How do i fit a boost gauge can sum one help me please thanks pete

tubbytommy

iTrader: (20)

well you will need to connect the wires up to a igniton live and an earth, try the radio wires for that,
then the other end usually joins up on the pipe from the dump valve that is on the intercooler

wrx fifer

iTrader: (34)

if you tell us what car you have and what boost gauge you have that may help, with the correct advice

Grant

forister

iTrader: (1)

not got one yet buddy. i have a catalunya 1997 in top nick.

ironbridge

iTrader: (3)

Dead easy to fit......as tubbytommy said above

lloyd6240

Ok, so I take it that the pipe from the dump valve runs through the bulk head. 03 plate sti ppp. Is it really that easy? How many hours?

alcazar

iTrader: (2)

Pipe, wire, yes, through the bulkhead, but whether pipe or wire depends on the type of gauge

There are grommets you can pierce, one on passenger side has the aircon pipes, another, driver's side is beneath the brake master cylinder.

How long is the same as how long is a bit of string, but allow an afternoon, with breaks for thought and coffee, you'll not go far wrong. I fitted three Defis from scratch in the same time, but am OK with electrics etc.