Grant Hay

iTrader: (6)

Does anyone have any feedback as to the best silicon inlet hose to suit a sc 46 or a md321t in the smaller 58 mm inlet .

to suit a 2002 sti prodrive.

ive heard of perrin and samco , which is the best

cheers

jura11

iTrader: (7)

Best will be Hard Inlet pipe,because don't collapse under boost,some silicone hoses just collapse under boost.



Jura

Grant Hay

iTrader: (6)

who does the hard inlet pipes ?

cheers

jura11

iTrader: (7)

What does?


Here is picture how it looks





Jura

Grant Hay

iTrader: (6)

cheers for that , never seen them before, however all the reviewsi found say that they have a really poor fit.

is the samco and perrin silicon ones really that bad for collapsing ?

jura11

iTrader: (7)

Yes have poor fitments,because people have TGV delete and if you have Spec C,JDM STi V8 inlet manifold which is TGV free,will fit much better.But you can create own for less than from aluminium(think Engine Tuner selling own and which have good fitment)

Why Samco or Perrin collapse,this don't know but i've seen few(SC50,SC54 or MD321V) but on high boost.
But with SC46 or MD321T will be maybe OK,but not sure.


Jura

Grant Hay

iTrader: (6)

thanks for your help Jura, think im gonna get the perrin one, unless anyone else has had any other experiances

Harryr34

iTrader: (9)

I had a inlet pipe made out of some alloy pipework; try a local exhaust fabricator, it only cost me £40

started with 56mm tube from the turbo stepping up to 76mm and then onto 90mm IIRC...

Steve Whitehorn

iTrader: (13)

I have a Perrin one running 1.5bar through a MD321T+ somewhere between 450hp -500hp
and it is fine.

Anders_WR1

iTrader: (8)

Lateral performance do some silicon hoses reinforced with wire. They don't have the flanges for dump valve and breather too.

http://lateralperformance.co.uk/sect...8d5264462b1dbb

Anders

Stevesbluewrx

iTrader: (4)

+ 1 . Mine is fine.

I've seen a few Samco ones cave in on the rollers.


Steve

New_scooby_04

iTrader: (4)

Perrin fine on my SC46 running 1.7bar

jimbo14prodrive

I'm running an sfs inlet hose and an sc46 at 1.55 bar (440bhp) and that is fine.