Engine breathers?
#1
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Sep 2006
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
Engine breathers?
Hi guys, just fitted my Uk98 block with a early manifold. I've overcome most issues but have 2 problems. I have a grey wiring block spare which comes out of the bulkhead near the turbo as in pic. The cam and crank sensors have nowhere to connect, maybe related??
Also my 98 block has engine breather which splits into 2 which I have no idea what to join to? The manifold has 1 spare breather connection just above as in pic?
Any help much appreciated guys, need to get it running. Thanks.
Also my 98 block has engine breather which splits into 2 which I have no idea what to join to? The manifold has 1 spare breather connection just above as in pic?
Any help much appreciated guys, need to get it running. Thanks.
#3
the plug in top pic should plug into a socket just to the rear right of throttle body (as stood looking at engine) which is part of the inlet/engine loom generally near where knock sensor plugs in. ans the two breathers one goes to inlet tract and other to the pcv valve under throttle body.
#5
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Sep 2006
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
the plug in top pic should plug into a socket just to the rear right of throttle body (as stood looking at engine) which is part of the inlet/engine loom generally near where knock sensor plugs in. ans the two breathers one goes to inlet tract and other to the pcv valve under throttle body.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM