Car has no go
#1
Scooby Regular
Thread Starter
Join Date: Sep 2007
Location: Rocester
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Car has no go
Hi i own a turbo 2000 on an x-reg, and i am slowly buying things for it. its standard apart from a 3'' decat pipe. I bought some silicone vaccum pipe for it and set about replacing the originals. when i replaced the orignals all was fine and then yesterday i went out with the misus. the car drove fine then when i opened it up it didnt seem to running hardly any boost. It never missed a beat and drives spot on it just doesnt pull very hard. Now the engine check light has come on! has anyone else had a simaler problem. Ive checked all the vaccum pipes and dump valve, im guessing its the Y-pipe split but i cant see anything. please help me
#3
Scooby Regular
iTrader: (7)
Join Date: Sep 2004
Location: Devon
Posts: 1,115
Likes: 0
Received 0 Likes
on
0 Posts
put the original vacuum pipes back on, if you have replaced the boost control pipework you have taken off a pipe with a small olive in (connected to the boost solenoid) that you need to help control the boost
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM
Adam Kindness
ScoobyNet General
0
15 September 2015 03:31 PM