Wheels to fit bremmbos
08 March 2011, 04:10 PM
#5
I reckon an ET of 45mm and you'll be fine (the 330mm K-Sport calipers fit under 17" x 7J ET45 alloys on my car - so is a fair indicator for the Brembos).
Possibly might get away with it being as shallow as 37...???
Possibly might get away with it being as shallow as 37...???
Last edited by joz8968; 08 March 2011 at 04:13 PM.
08 March 2011, 04:18 PM
#6
I'd have to disagree about the K-Sports being an indicator for Brembo's fitting.
The STi gold Brembo's are wider than all of the aftermarket calipers (K-Sports, AP's etc), hence the fitting issues all the time. Even an aftermarket brembo kit close to the size (300mm instead of the STi 326mm) goes under most 17's.
The STi gold Brembo's are wider than all of the aftermarket calipers (K-Sports, AP's etc), hence the fitting issues all the time. Even an aftermarket brembo kit close to the size (300mm instead of the STi 326mm) goes under most 17's.
Trending Topics
08 March 2011, 04:23 PM
#8
I'd have to disagree about the K-Sports being an indicator for Brembo's fitting.
The STi gold Brembo's are wider than all of the aftermarket calipers (K-Sports, AP's etc), hence the fitting issues all the time. Even an aftermarket brembo kit close to the size (300mm instead of the STi 326mm) goes under most 17's.
The STi gold Brembo's are wider than all of the aftermarket calipers (K-Sports, AP's etc), hence the fitting issues all the time. Even an aftermarket brembo kit close to the size (300mm instead of the STi 326mm) goes under most 17's.
I assumed (never do that!) that the Brems were of similar dimensions/position on the hubs, to the K's.
08 March 2011, 05:28 PM
#10
Scooby Regular
Thread Starter
iTrader: (11)
Join Date: Mar 2007
Location: Essex
Posts: 2,574
Likes: 0
Received 0 Likes
on
0 Posts
My brembos are in the paint shop at the min and iv just picked up some wheels 17 by 7 inch deep, will these fit with the brembos? Save me having them refurbed and wasting my money lol
09 March 2011, 01:07 PM
#22
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
Mine are ET 44mm on an 8" rim...
BUT it's all about the shape of the spokes. My OZ's are flat as a pancake and missed by miles.
dunx
BUT it's all about the shape of the spokes. My OZ's are flat as a pancake and missed by miles.
dunx
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
