esxboy1

sinmple as stated ,how you get the crank shaft pulley off an 96 uk2000t

shane_evans

iTrader: (1)

if the engine is still the car, could but it in gear that should hold the crank still. ;-)

esxboy1

good call that man

shane_evans

iTrader: (1)

No worries

joz8968

iTrader: (13)

Slip a really long pry bar around the wrench's handle, so as to reduce the sheer poundage (human effort) you have to exert on the crank pulley nut... And it will be a lot of lb ft!!!

djandyg

iTrader: (2)

Big breaker bar, in gear, someone with their foot on the brakes too...


alternatively you can put a bar in there and wedge it against the chassis leg and give a quick flick over on the key.....dont attempt this if your not comfortable with it tho!

Parrg341

iTrader: (8)

OMG thats the first ive heard of doing it that way! lol

joz8968

iTrader: (13)

The starter motor trick is well known on here.

I personally wouldn't feel comfortable doing it. You can get far more force using a long breaker bar, so wouldn't want to risk the starter breaking...