Help, four pot problem
#1
I have just fitted four pots to my 93 Legacy, and the inner edge of the spokes on my wheels just catch on the embossed Subaru logo. The wheels were bought from a mate of mine who was running them on a MY99 (four pots as standard), have I done something wrong whilst fitting the calipers, or are my hubs different?
#2
Scooby Regular
Join Date: Sep 2000
Location: Deepest Darkest Dorset!!
Posts: 10,011
Likes: 0
Received 1 Like
on
1 Post
Assuming that the discs are running true, and the discs is in the middle of the caliper, and thats striaght too, I guess the hub must be a little bit different somewhere, the easiest solution is a small shim, any half decent motor accesorie shop should have them 3-4mm would probably do!
#3
you need to probably change wheels, the inset and outset are different from the earlyand late cars.
in other words the spokes are to far in to the canter of the rim, thus they touch the caliper.
check first to see if the disc is sat in the center of the caliper gap, but normally the dish of the wheel is to shallow.
Len
(www.subaru4you.co.uk)
in other words the spokes are to far in to the canter of the rim, thus they touch the caliper.
check first to see if the disc is sat in the center of the caliper gap, but normally the dish of the wheel is to shallow.
Len
(www.subaru4you.co.uk)
#6
Had the shims made by a machine shop through work FOC, 3mm thick, they work a treat.
I am well impressed with the brakes, they inspire much more confidence than the old ones, I was never quite sure whether it was going to stop before.
I am well impressed with the brakes, they inspire much more confidence than the old ones, I was never quite sure whether it was going to stop before.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM