what injectors are these ??
09 January 2011, 06:22 PM
#3
holes for the screws for the injector caps b4 there.
if u say there posibly ver 5/6 would that make them what phase ?? they dont look like 2's tey look like phase 1/1.5 with some sort of adaptor kit on ??
09 January 2011, 06:29 PM
#4
there suppose to be 550's but arnt 550's blue top... starting to get confused as to colour i no grey 380 and yellow 440 i thought blue was 550 but these are red ?? also i make u correct ive neva seen with the
holes for the screws for the injector caps b4 there.
if u say there posibly ver 5/6 would that make them what phase ?? they dont look like 2's tey look like phase 1/1.5 with some sort of adaptor kit on ??
holes for the screws for the injector caps b4 there.
if u say there posibly ver 5/6 would that make them what phase ?? they dont look like 2's tey look like phase 1/1.5 with some sort of adaptor kit on ??
Here are some phase 1 550's
09 January 2011, 06:43 PM
#6
09 January 2011, 07:20 PM
#10
From what i can gather mate theses are for a nissan s14 and are sard injectors mate but whether they fit right in a subaru i don't know?
http://www.frsport.com/
http://www.frsport.com/
Last edited by prodriverules; 09 January 2011 at 07:21 PM.
09 January 2011, 08:34 PM
#11
From what i can gather mate theses are for a nissan s14 and are sard injectors mate but whether they fit right in a subaru i don't know?
http://www.frsport.com/
http://www.frsport.com/
http://cgi.ebay.co.uk/Subaru-impreza...item43a444dcbd
they say there power enterprice injectors but there is nothin like them on there site ...???
09 January 2011, 11:36 PM
#12
Former Sponsor
iTrader: (20)
Join Date: Oct 2006
Location: 8.95 @ 168mph. Zero to 1KM 194.1mph
Posts: 1,150
Likes: 0
Received 0 Likes
on
0 Posts
The Injectors are phase 1/1.5 Denso 550's, but are re-boxed by several companies.
The yellow injectors shown in the picture are phase two.
The top o rings are the same size, but phase two injectors use a much smaller bottom o ring, which is why you can use an adapter to get it to fit into the phase one rail.
For the record, "Injector Flow" is another "Flat 4" company, Be warned !
Mark.
The yellow injectors shown in the picture are phase two.
The top o rings are the same size, but phase two injectors use a much smaller bottom o ring, which is why you can use an adapter to get it to fit into the phase one rail.
For the record, "Injector Flow" is another "Flat 4" company, Be warned !
Mark.
10 January 2011, 12:25 PM
#13
The Injectors are phase 1/1.5 Denso 550's, but are re-boxed by several companies.
The yellow injectors shown in the picture are phase two.
The top o rings are the same size, but phase two injectors use a much smaller bottom o ring, which is why you can use an adapter to get it to fit into the phase one rail.
For the record, "Injector Flow" is another "Flat 4" company, Be warned !
Mark.
The yellow injectors shown in the picture are phase two.
The top o rings are the same size, but phase two injectors use a much smaller bottom o ring, which is why you can use an adapter to get it to fit into the phase one rail.
For the record, "Injector Flow" is another "Flat 4" company, Be warned !
Mark.
hi mark do u have a contact number for urself at lateral would like to get some prices to get them tested and just a cupple of questions about these injectors
cheers
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM