is 330 max for a tdo5
#1
Scooby Regular
Thread Starter
iTrader: (9)
Join Date: Apr 2010
Location: WIGAN
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
is 330 max for a tdo5
Just seeing if the TD05 is good for 330hp with the aditional mods on my bug wrx.
Before you all start i dont want the vf34 or 35 as i can get the same hp with the tdo5
Before you all start i dont want the vf34 or 35 as i can get the same hp with the tdo5
#4
Neil, please don't take this the wrong way, but there is an awful lot more to a car's performance than the headline bhp figure
#5
Scooby Regular
iTrader: (7)
Hi there TD05-16G is good for 330-340BHP(maybe little bit more),TD05-18G is good around 350-360BHP(on some application/cars 370BHP),TD05-20G i s good for 380-400BHP(on some cars you will see upto 405BHP),but these turbos must be genuine TD(like Harvey selling or Andy Forrest),not Chinese turbo's/fakes/knock off .
For WRX is good TD05-16G or TD05-18G,20G's are really laggy on WRX.And comparison with VF-34 or 35 is same like TD05-16G.And problem with TD range is outside/eBay is lot of copies...
For WRX is good TD05-16G or TD05-18G,20G's are really laggy on WRX.And comparison with VF-34 or 35 is same like TD05-16G.And problem with TD range is outside/eBay is lot of copies...
Last edited by jura11; 22 December 2010 at 07:25 PM.
#6
Scooby Regular
Thread Starter
iTrader: (9)
Join Date: Apr 2010
Location: WIGAN
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
its will be a 16g ppl
DNC what i mean is i dont want to go over 330hp hence i dont want a vf34 etc just a sutable mod for the car with the other stuff to get it to 330 or below
DNC what i mean is i dont want to go over 330hp hence i dont want a vf34 etc just a sutable mod for the car with the other stuff to get it to 330 or below
#8
Unmapped 12.4s @ 105
iTrader: (29)
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes
on
4 Posts
16g should do 330 all day long, as mentioned above though, make sure you get one from a reputable supplier as you'll need a front entry converted one.
<
<
#10
Scooby Regular
Thread Starter
iTrader: (9)
Join Date: Apr 2010
Location: WIGAN
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
in time
STI intercooler
STI pinks
Walbro 255
alreay have the full system on just one more cat to get ride of but this will only happen the day it goes for a remap as well as everything else to be fitted the week it goes in,
Like i have said i am not arsed If the car gets to 330 just as ong as it stays well with in its limits i am happy
STI intercooler
STI pinks
Walbro 255
alreay have the full system on just one more cat to get ride of but this will only happen the day it goes for a remap as well as everything else to be fitted the week it goes in,
Like i have said i am not arsed If the car gets to 330 just as ong as it stays well with in its limits i am happy
#11
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
td05 16g genuine one as said not a chinese copy off ebay, vf28, vf29, vf30, vf34, vf35 will all give similar power on your car give or take a bit.
Simon
Simon
#14
Scooby Regular
iTrader: (19)
Join Date: Nov 2005
Location: notts
Posts: 2,770
Likes: 0
Received 0 Likes
on
0 Posts
as the aboth. the 16g is good for figures from around 330/350bhp
mine got 341,4bhp, with 338ftlb torque at 1.3bar. again thanks to jgm, that was in summer too
im looking at an 18g know.
infact, pm'ed simon for advice
mine got 341,4bhp, with 338ftlb torque at 1.3bar. again thanks to jgm, that was in summer too
im looking at an 18g know.
infact, pm'ed simon for advice
Thread
Thread Starter
Forum
Replies
Last Post
Wingnuttzz
Member's Gallery
30
26 April 2022 11:15 PM
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM