Safe Max boost
11 December 2010, 09:42 AM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2004
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Safe Max boost
Hi all, can anybody advise on the safe max boost on the car / specs listed below.. thanks!
2001 WRX blob eye Impreza
Forged arrow rods & omega pistons
Stock head gaskets
Andy FForest TD 05 20G
STI Injectors
Sti Intercooler
Walbro Pump
Fuel Lab FPR, with base pressure lifted
2001 WRX blob eye Impreza
Forged arrow rods & omega pistons
Stock head gaskets
Andy FForest TD 05 20G
STI Injectors
Sti Intercooler
Walbro Pump
Fuel Lab FPR, with base pressure lifted
11 December 2010, 09:07 PM
#2
Scooby Regular
Thread Starter
Join Date: Feb 2004
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
I've not had a scoob for about 5 years & have a little look see in here now & again. I am amazed nobody has any feed back on my post. This is a Andy Fforest stage whatever setup, there must be loads of scoobs like it & you don't know what boost you can run...........wow shoot me down
Come on get a grip how are your cars operating... Some of you guys must be logging
Come on get a grip how are your cars operating... Some of you guys must be logging
Last edited by scandinavian flick; 11 December 2010 at 09:10 PM.
11 December 2010, 09:27 PM
#4
I've not had a scoob for about 5 years & have a little look see in here now & again. I am amazed nobody has any feed back on my post. This is a Andy Fforest stage whatever setup, there must be loads of scoobs like it & you don't know what boost you can run...........wow shoot me down Come on get a grip how are your cars operating... Some of you guys must be logging
Come on get a grip how are your cars operating... Some of you guys must be logging
only just seen your thread and id say with forged internal's and 20g it would be ok to run 1.5/1.6 bar boost maybe 1.7 if the turbo is liking it and the motor is taking good ignition
Thread
Thread Starter
Forum
Replies
Last Post