Notices

My car seems to be running stiff ?

Thread Tools
 
Search this Thread
 
Old 10 December 2010, 07:40 PM
  #1  
BAD_MAN_121
Scooby Regular
Thread Starter
 
BAD_MAN_121's Avatar
 
Join Date: Sep 2008
Location: Lancashire
Posts: 94
Likes: 0
Received 0 Likes on 0 Posts
Default My car seems to be running stiff ?

hi guys, my v2 subaru seems to be running stiff, like its jammed up, when rolling down a hill it seems to be stiff like im pressing the brake, what could this be ?

i changed the front 2 calipers and im still having the same problem.
Old 10 December 2010, 07:46 PM
  #2  
f4la k
Scooby Regular
iTrader: (1)
 
f4la k's Avatar
 
Join Date: Dec 2009
Location: Ayrshire
Posts: 1,145
Likes: 0
Received 0 Likes on 0 Posts
Default

Does it have dccd. Are the handbrake shoes sticking on the handbrake. Is the piston on the back brakes free enough or are they seized, I'd be checking these things first.
How long have you owned the car for..
Old 10 December 2010, 07:54 PM
  #3  
BAD_MAN_121
Scooby Regular
Thread Starter
 
BAD_MAN_121's Avatar
 
Join Date: Sep 2008
Location: Lancashire
Posts: 94
Likes: 0
Received 0 Likes on 0 Posts
Default

hi, no it doesnt have a dccd, handbrake lever is high, iv not open any, i bought the cars 3days ago, i took it garage this morning and he checked it on the ramp and told me its the front 2 calipers, so i bought some from a local breaker, but car still seem the same, it seems like rear are jammed up. how do i check if piston jamed etc, if they are can i release them,.
Old 10 December 2010, 07:54 PM
  #4  
BAD_MAN_121
Scooby Regular
Thread Starter
 
BAD_MAN_121's Avatar
 
Join Date: Sep 2008
Location: Lancashire
Posts: 94
Likes: 0
Received 0 Likes on 0 Posts
Default

but car has recently just had new break pads put in, could it be tight fitting.
Old 10 December 2010, 08:47 PM
  #5  
f4la k
Scooby Regular
iTrader: (1)
 
f4la k's Avatar
 
Join Date: Dec 2009
Location: Ayrshire
Posts: 1,145
Likes: 0
Received 0 Likes on 0 Posts
Default

Could be. Just remove the back wheels and it will be quite self explanatery how to remove caliper slider and then just get a pry bar in and ease the piston back, if it moves ok its not seized, but remember they are quite hard to push back.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Iqy7861
Engine Management and ECU Remapping
22
12 October 2015 09:21 AM
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM
ossett2k2
General Technical
9
13 September 2015 09:35 AM
samSCOOBY
ScoobyNet General
2
11 September 2015 11:54 AM
alcazar
Other Marques
9
09 September 2015 05:42 PM



Quick Reply: My car seems to be running stiff ?



All times are GMT +1. The time now is 09:33 AM.