hi guys just fitted a hks inlet pipe but noticed i do not have the oil breather holes that normally go to the inlet tract. Am i able to block them till i get a catch can any help guys be great cheers rob

 

Just leave them to VTA mate. You may get some fumes in the cabin though! Try and point them away from the headers and other sources of heat.

 

Take the crank breather and the 2 cam cover breathers via hose ( I used PVC reinforced hose ) to an oil catch can and then to air, or just to air by directingthe hoses under the car! Suggest down into/thru crossmember by steering rack