When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
hi iv got a subaru impreza wrx sti ppp 2003 the 0-60 is 4.6sec im lookin into geting to 4.2secs or lower could any1 help me, is my first subaru its a ppp what mods would i need for the upgrade, and iv got some plans thinking would it hit 350 bhp and would it hit 4.2s
remap ecu tek
green airfilter
full 3inch all the way
manifold
wallbro fullpum
ngk
if iv missed anyting please fill in
Last edited by w44syf; 26 November 2010 at 05:53 AM.
I've got almost the same car, bue without the PPP. Mine came with a decat 3' straight, wallbro pump and ecu tek. I've donr bits here and there, and now its running 357bhp.
The first thing to go though was the clutch, it's expensive to replace mainly due to labour, deff. worth an upgrade.
Also, when it's servieced, and a cam belt is due, replace that aswell as your plugs. Worth doing it once and then not again..lol
You say 0-60 in 4.6 Have you actually achieved that or are you quoting the Prodrive blurb? To lose 0.4 sec you will probably need an extra 80bhp or more! It's the law of diminishing returns, I'm afraid.
0-60 is only good for the drag strip, and then even there you spin too much
The biggest one to get down is the 60-100mph time - the difference between 0-60 of 4.6 and 4.2 is hard to even catch. But once going the extra power pulls the car lengths.