Dazzles Fiesti

iTrader: (2)

Hi all again

Looking at getting some of these for our project. Click HERE
Anyone done this conversion? Anyone bought from them?

Is there anyone/anywhere we can get them cheaper??

Many thanks

mickywrx

iTrader: (29)

I've done it, with a little help, but didn't get the stuff from them.

Mine stood me at about £230, with the correct discs; which aren't included in the above link.

alcazar

iTrader: (2)

Why not source some rear Brembos, and buy the kit to fit them from Godspeed, who can also do you discs if you don't get any, and pads to suit?

They do fit under WRX 17" wheels, for an example.

Dazzles Fiesti

iTrader: (2)

Forgot to say, they need to fit under 15" rims!!

mickywrx

iTrader: (29)

Dunno if 15's clear them, but, my 16" Speedlines do.



Bracketry,

alcazar

iTrader: (2)

Would seriosuly doubtn that 15" wheels will clear. DropIan an e-mail at ian@godspeedbrakes.co.uk, for advice and costs.

scottydouk

iTrader: (3)

when going from single rear pot callipers to twin pot on a early classic impreza do you need the extra brackets? if so, where can i get them from? cheers

Godspeed Brakes

iTrader: (259)

The rear Subaru 2 pot calipers will fit under some 15" wheels , they do fit under speedline , raceline and compomotive motorsport 15" wheels as I have them on my rally car , and there is quite a bit of room left.

I dont have any calipers available , but you should be able to pick a pair up for about £100 , I can supply you grooved 290mm rear discs and kevlar pads , and a rear fitting kit for £170 plus £12.50 P&P

I sell the fitting kits on there own for £50

Cheers Ian
01656 723060

Dazzles Fiesti

iTrader: (2)

That's good as we're running Compomotive MO's

Might have to contact you ref fitting kit

Dazzles Fiesti

iTrader: (2)

Hi all

Bringing this up again as looking for some 2-pot calipers
If anyone know's of anyone with some to sell, please send them this way or let me know?

Many thanks

Dazzle