nicowagon

Hi,I have an m plate wrx and was wondering if anyone could tell me if the 5 stud vauxhall alloys fit my subaru,also if anyone no's any other other compatible makes the info would be much appreciated

JonMc

iTrader: (51)

iirc 5 stud Vauxhalls are 5x110 whereas the Subaru is 5x100, so no

JonMc

iTrader: (51)

http://www.carlsalter.com/wheel_fitments.html

Definately 5x110, I used to have one

JonMc

iTrader: (51)

You will find other 5x100 wheels but the centre bore and offset will make a difference.

nicowagon

Thanks for the info this is me probably sounding stupid but does it make a difference if there multi figment,the 1's I was looking at are off a vectra but are multi stud and have 10 holes,sorry if I sound stupid

JonMc

iTrader: (51)

If the offset is okay, there is a spigot ring to ensure that the centre bore is correct, and the additional holes are drilled to the right PCD, ie 5x100, and tapered to accept the wheel nuts then yes they are fine.

Vauxhall FWDs usually have high offsets so should be fine in that respect. You just need to convince yourself that the other bits will fit okay.

JonMc

iTrader: (51)

If the offset is okay, there is a spigot ring to ensure that the centre bore is correct, and the additional holes are drilled to the right PCD, ie 5x100, and tapered to accept the wheel nuts then yes they are fine.

Vauxhall FWDs usually have high offsets so should be fine in that respect. You just need to convince yourself that the other bits will fit okay.