sc_sjo

iTrader: (7)

Hi all

I believe there may be some wiring changes to be made to run a v5/6 PFC on a UK MY99 car? Would anyone be kind enough to enlighten me please?

Not sure if there's a manual available?


Cheers

BBB3

iTrader: (7)

you will need the mapper to do this for you,

i had the same problem,

here is mythread look at this

https://www.scoobynet.com/general-te...-power-fc.html

Saint AAI

Top middle two pins I believe on the right hand plug (when looking at loom from the back going into the ECU if you know what I mean). Crank and Cam signal wires, pins 5 and 6. Only what I've read before mind, never actually done it myself.

http://www.jollygreenmonster.com/pinouts.htm

sc_sjo

iTrader: (7)

Cheers i'll have a look throgh for comparison. Hopefully if there's anything else someone will point it out


BBB3- I will most likely be the mapper in this instance.