Boost problem
21 June 2010, 12:08 PM
#1
Scooby Regular
Thread Starter
Join Date: Aug 2005
Location: My turbo blows, air lots of it!!
Posts: 9,073
Likes: 0
Received 0 Likes
on
0 Posts
Boost problem
Car is only making 0.4-0.5 boost pressure,I'm not sure if it's a plumbing problem or something else TBH. As I'm pretty much a mechanical dumplin I've taken a few photos so hopefully somebody can have a look and see if its been plumbed in ok.
P.S the turbo has been recently rebuilt and just fitted a few weeks ago for the run in process.
Photo's
The top hose from the boost solenoid
Goes in behind the inlet manifold
The bottom hose from the boost solenoid (Red hose)
Goes to a 'T' piece
The top hose from the 'T' piece
Goes to the turbo
The bottom hose from the 'T' piece
Goes to the waste gate
Is this correct Ja?
P.S the turbo has been recently rebuilt and just fitted a few weeks ago for the run in process.
Photo's
The top hose from the boost solenoid
Goes in behind the inlet manifold
The bottom hose from the boost solenoid (Red hose)
Goes to a 'T' piece
The top hose from the 'T' piece
Goes to the turbo
The bottom hose from the 'T' piece
Goes to the waste gate
Is this correct Ja?
21 June 2010, 12:35 PM
#3
Scooby Regular
Thread Starter
Join Date: Aug 2005
Location: My turbo blows, air lots of it!!
Posts: 9,073
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post