Considering a vf35 turbo to fit my uk 2000 version 4 impreza, what I would like to know is are they just a direct fit or do I have to change any water or oil pipes or use them from my tdo4 any help much appreciated

 

its a straight swap. although some people have mentioned using a different banjo bolt. i just found that with the correct washer you didnt need to change anything

 

Thanks for the reply mate cheers lee

 

Not quite sure what year car you have, there were never any UK version cars, versions just referred to JDM STI's between 1996 and 2000, so if your car is prior to 1999 it will require an aftermarket ecu for it to run a vf35 (and some 440's or better still 550/565's).
Add that to your budget, simtek costs 1200 quid mapped and an uprated fuel pump (though if your doing all that I would get a new oil pump too )

Tony

 

uprated fuel pump and remap. Version 4 come with 440s didnt they?

 

I dunno as there were no version 4 uk cars JDM STI's are different, if the car is an MY99 it will have 440's and a mappable ecu, if its prior to that then it has 380's and (MY97/98) dont have mappable ecu's so its after market only.

This is why you give the model/model year of your car so its not confusing and dont refer to silly versions that dont exist

Tony