Help with SARD 800cc injector install?
05 June 2010, 08:50 PM
#1
Scooby Newbie
Thread Starter
Join Date: Sep 2009
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Help with SARD 800cc injector install?
I live in America, but I have a Subaru Impreza converted to a RHD Type RA, my #2 injector took a **** on me, and i've been wanting to get new injectors for a while anyways (stocks are maxxed out), I ordered a set of 800cc SARD injectors with an EJ20G install kit (clips, collars, o-rings) but of course, the directions are in Japanese, and I can't seem to figure out how these install properly, it almost seems like I have to cut things to make it work, but I am hoping to find someone whos done SARD injectors on a P1 engine that could help me out? Pleeeease!
-Thank you in advance, from the other side of the pond.
-Thank you in advance, from the other side of the pond.
06 June 2010, 10:21 AM
#2
Scooby Regular
iTrader: (2)
Join Date: Aug 2007
Location: Northern Ireland. Part of the UK
Posts: 659
Likes: 0
Received 0 Likes
on
0 Posts
I was looking at your other thread... http://www.rs25.com/forums/f7/t13652...r-install.html
It looks as though you need to remove the centre part out of the cap, the only way the injector can leak once clamped in is if you damaged the o rings on install or they are not seated correctly.
It looks as though you need to remove the centre part out of the cap, the only way the injector can leak once clamped in is if you damaged the o rings on install or they are not seated correctly.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
