Notices

bit of advice needed !!!!

Thread Tools
 
Search this Thread
 
Old 11 May 2010, 07:46 PM
  #1  
goodyegg
Scooby Regular
Thread Starter
iTrader: (6)
 
goodyegg's Avatar
 
Join Date: Sep 2008
Location: bridgend
Posts: 1,137
Likes: 0
Received 0 Likes on 0 Posts
Default bit of advice needed !!!!

few little things that are starting to play up with my car !!!! uk turbo 2000(94)..when i start up in the morning it seems to go high on the revs (up and down) then after about 30 seconds it settles,and i can hear a clicking sound from the front of the car..when i did an ecu check it come up with an idle fault. if im being honest im not the most technical of people and im not sure what i have to replace or wat to do..also i have a clutch problem as well, it seems to drive fine when changing through the gears at normal speed however wen u put your foot down and the turbo kicks in the clutch sticks (for about 2-3 seconds) sometimes resulting me pulling it back down with my foot...checked the fluid and its black in colour but not sure how to bleed it out and put new fluid all the way through..struggling a little bit here and need some good advice if u could guys
Old 12 May 2010, 09:23 AM
  #2  
hullstu1
Scooby Newbie
 
hullstu1's Avatar
 
Join Date: Feb 2008
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

posssibly a maf problem withe idleing prob, is there a return spring on the clutch arm missing ? mine was the same replaced the spring and sorted the problem..
Old 12 May 2010, 03:57 PM
  #3  
goodyegg
Scooby Regular
Thread Starter
iTrader: (6)
 
goodyegg's Avatar
 
Join Date: Sep 2008
Location: bridgend
Posts: 1,137
Likes: 0
Received 0 Likes on 0 Posts
Default

where would i find the return spring on the clutch..sound a bit like an idiot but dont have much of a clue..how do u solve the maf problem..
Old 12 May 2010, 04:06 PM
  #4  
bigsinky
Scooby Regular
 
bigsinky's Avatar
 
Join Date: Dec 2002
Location: Sunny BELFAST
Posts: 19,408
Likes: 0
Received 0 Likes on 0 Posts
Default

you solve your problems by taking it to a good subaru mechanic who knows what he is doing.
Old 12 May 2010, 04:23 PM
  #5  
mike81
Scooby Regular
 
mike81's Avatar
 
Join Date: May 2007
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
Default

the fluid shouldnt be black mate, its knackered. I'd start by bleeding it through. Same theory as brake bleeding
Old 13 May 2010, 08:09 PM
  #6  
goodyegg
Scooby Regular
Thread Starter
iTrader: (6)
 
goodyegg's Avatar
 
Join Date: Sep 2008
Location: bridgend
Posts: 1,137
Likes: 0
Received 0 Likes on 0 Posts
Default

sorted the clutch problem .. but its the idle issue still a fault..if i had the cash to take it to someone who is a scooby mechanic i would chees mate..above...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sambob
Engine Management and ECU Remapping
41
27 November 2015 07:36 PM
taylor85
Wanted
2
13 September 2015 04:57 PM
AzzDSM
Engine Management and ECU Remapping
4
13 September 2015 03:59 PM
robbie1988
Wanted
2
13 September 2015 09:25 AM
Scooby-Doo 2
Wheels And Tyres For Sale
1
09 September 2015 06:51 PM



Quick Reply: bit of advice needed !!!!



All times are GMT +1. The time now is 11:55 PM.