Notices
General Technical
Sponsored by:
Sponsored by: CARiD

info please

Thread Tools
 
Search this Thread
 
Old Apr 21, 2010 | 11:05 AM
  #1  
Bealescooby's Avatar
Bealescooby
Thread Starter
Scooby Regular
iTrader: (36)
 
Joined: Jun 2007
Posts: 2,798
Likes: 0
From: Wolves
Default info please

Right , my car is undergoing a full rebuild and becoming a 2.1
Car - 98 v4 sti type r
I've fitted an 18g before rebuild but wasn't mapped as it was not being driven until it was mapped
The car was just started daily and 1 day spun a shell

I have not yet fit the Ecu (apexi) as i was gonna do this on mapping day along with my 650cc injectors

Know i've been told that i need to run my engine in for a 1000 mile

Know i'm wondering will the car be safe unmapped with no boost (switch off through AVCR)for the 1000 mile or will i need to have my car mapped and then tweaked after the 1000 mile

I don't really want to spend money on 2 maps as the car costs are already out of control

So can i drive the 1st 1000mile on standard ecu (75 mines ecu) and 18 g

Last edited by Bealescooby; Apr 21, 2010 at 11:07 AM.
Reply
Old Apr 21, 2010 | 01:31 PM
  #2  
mje_wrx's Avatar
mje_wrx
Scooby Regular
15 Year Member
iTrader: (6)
 
Joined: Feb 2008
Posts: 1,654
Likes: 0
From: Merthyr Tydfil
Default

JGM once told me the scooby ecu is very good at learning, iv just rebuilt mine and added loads, and running in on standard ecu before i get my gems fitted. he told me to take it easy. so thats what im doing. worth contacting who u want to map it tho.
Reply
Old Apr 21, 2010 | 02:40 PM
  #3  
Jolly Green Monster's Avatar
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Default

the standard ecu will pull timing hopefully etc.. and so learns to an extent

with those mods I would get a running in map put on it though

Simon
Reply
Old Apr 21, 2010 | 04:00 PM
  #4  
bigsinky's Avatar
bigsinky
Scooby Regular
 
Joined: Dec 2002
Posts: 19,408
Likes: 0
From: Sunny BELFAST
Default

Originally Posted by Bealescooby

I don't really want to spend money on 2 maps as the car costs are already out of control

ahhhhhhh...............work every hour god sends, spend every penny you have. The joys of subaru modification
Reply
Old Apr 21, 2010 | 04:18 PM
  #5  
Jolly Green Monster's Avatar
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Default

I normally only charge £50+VAT extra to do running in map and then final map than just a full map.. as the second map is a tweak as I have seen the car already etc

obviously travel cost maybe involved

Simon
Reply
Old Apr 21, 2010 | 11:21 PM
  #6  
Bealescooby's Avatar
Bealescooby
Thread Starter
Scooby Regular
iTrader: (36)
 
Joined: Jun 2007
Posts: 2,798
Likes: 0
From: Wolves
Default

Originally Posted by bigsinky
ahhhhhhh...............work every hour god sends, spend every penny you have. The joys of subaru modification
LOL , i don't work every hour m8 just a 50hr week , but i got a wedding to pay for aswel so just keepin costs under control after the last yr on it

I normally only charge £50+VAT extra to do running in map and then final map than just a full map.. as the second map is a tweak as I have seen the car already etc

obviously travel cost maybe involved

Simon


So what your tellin me is £50 + vat for running in map then i need final map when i'm run in , could u pm cost of this please , i was also considering settin up a group mapping in Wolverhampton
Oh and could u set my avcr up properly if so cost on that please
Pm me if easier
Thanx for the help
Reply
Old Apr 21, 2010 | 11:32 PM
  #7  
Jolly Green Monster's Avatar
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Default

Originally Posted by Bealescooby
LOL , i don't work every hour m8 just a 50hr week , but i got a wedding to pay for aswel so just keepin costs under control after the last yr on it

I normally only charge £50+VAT extra to do running in map and then final map than just a full map.. as the second map is a tweak as I have seen the car already etc

obviously travel cost maybe involved

Simon


So what your tellin me is £50 + vat for running in map then i need final map when i'm run in , could u pm cost of this please , i was also considering settin up a group mapping in Wolverhampton
Oh and could u set my avcr up properly if so cost on that please
Pm me if easier
Thanx for the help
if you ran the car in and then got me to come and map it the cost would be £250+VAT

I would charge £150+VAT to put a running in map on it and £150+VAT to do the final map as it would be a tweak as such from the running in map.. therefore tweak cost not full map cost. Therefore total is only £50+VAT etc.

Thanks
Simon
Reply
Old Apr 21, 2010 | 11:55 PM
  #8  
Bealescooby's Avatar
Bealescooby
Thread Starter
Scooby Regular
iTrader: (36)
 
Joined: Jun 2007
Posts: 2,798
Likes: 0
From: Wolves
Default

I get it
Have u any free dates in May
Reply
Old Apr 26, 2010 | 09:38 AM
  #9  
Jolly Green Monster's Avatar
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Default

Yes mate.

I could do the 11th or 12th May near you.

Drop me a pm to discuss

Thanks
Simon
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
Nov 4, 2021 07:12 PM
bluebullet29
General Technical
9
Oct 5, 2015 02:17 PM
yabbadoo4
ScoobyNet General
11
Sep 30, 2015 10:33 PM
IanG1983
Subaru Parts
1
Sep 30, 2015 04:52 PM
slimwiltaz
General Technical
4
Sep 25, 2015 10:22 PM




All times are GMT +1. The time now is 12:46 PM.