keith.bauer

hi there
can anyone tell me what a 6k ecu is please

dj219957

6K - Ver2 STi Saloon - 13.34psi


will work in a 93-96 wrx provided you use super unleaded

keith.bauer

cheers for your reply
i have bought a 1995 wrx sti but with a wrx engine in it, td05 turbo, front mount,dump valve.
is this ecu alright for it

joz8968

iTrader: (13)

Rated at 275PS (271bhp). The highest bhp "phase 1" 4-plug ECU available (not including aftermarket chips such as Polar Performance's).

6K's map is designed for a TD05H 16g, so if you have a MY93-96 JDM WRX Wagon, it's not suitable (as it's fitted with the smaller TD04L).

dj219957

yes, use optimax or tesco 99ron

keith.bauer

i have a 1995 wrx sti import saloon but its fitted with a normal wrx engine (not sti).
the turbo is defo td05 as its written on it.
it seems to boost to 1 bar and drop very slightly to .9 bar.
is this okay or is there anything you would recommend to me.

keith.bauer

i have a 1995 wrx sti import saloon but its fitted with a normal wrx engine (not sti).
the turbo is defo td05 as its written on it.
it seems to boost to 1 bar and drop very slightly to .9 bar.
is this okay or is there anything you would recommend to me.

dj219957

1 bar = 14.50326 psi so taking acount of a not so accurate gauge id say that sounds fine.
the boost does tail off at the end normally.

keith.bauer

thanks for replies
just thought i would check.
on another note, i have in my garage from a previous scooby a rear diff 4.44 lsd.
what will this fit and is it sellable

dj219957

http://www.northursalia.com/techdocs...rannychart.pdf

joz8968

iTrader: (13)

keith, sorry about the TD05H bit to my post - I was writing as you had already posted, and didn't realise.

Marx Mcrae

iTrader: (4)

You dont have to use 99 ron fuel, 97 ron is fine on the 6K ecu.

Japan didnt get the high octaine fuel till mid 97, so the >97 cars werent mapped for it.