cant find fault code wires!! plz help
#1
Scooby Regular
Thread Starter
Join Date: Nov 2007
Location: essex
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
cant find fault code wires!! plz help
hi my cell light keeps flashing on my96 v limited, so im trying to find the fault codes.have pulled panel under steering column off and cant find these green and black wires im sposed to find.all the wires coming from the ignition/column etc are all covered in plastic protection any wires you can see are going into big plugs.i got jollygreens instructions but no where to be seen there are not that many stray wires and no such tell tale tape hiding anything.ive had a good search for ten mins or so but to no avail, what exactly do these wires look like .any help would be good cheers
#3
Hi,
Try the link below, there is a good picture of the connectors and easy to follow instructions.
Scoobypedia | Trusted knowledge for everything Subaru | Knowledge / Reading ECU Fault Codes
Stu
Try the link below, there is a good picture of the connectors and easy to follow instructions.
Scoobypedia | Trusted knowledge for everything Subaru | Knowledge / Reading ECU Fault Codes
Stu
#4
Scooby Regular
Thread Starter
Join Date: Nov 2007
Location: essex
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
ok cheers for that ,right found them and has given me fault code 31 (throttle position sensor,would that just be a straight forward swap and joc done do you think?
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM