cant find fault code wires!! plz help
 

hi my cell light keeps flashing on my96 v limited, so im trying to find the fault codes.have pulled panel under steering column off and cant find these green and black wires im sposed to find.all the wires coming from the ignition/column etc are all covered in plastic protection any wires you can see are going into big plugs.i got jollygreens instructions but no where to be seen there are not that many stray wires and no such tell tale tape hiding anything.ive had a good search for ten mins or so but to no avail, what exactly do these wires look like .any help would be good cheers:confused:

Check out the ECU sections on Scoobypedia - there's a photo showing the plugs/wires and where they're located, etc...

Hi,

Try the link below, there is a good picture of the connectors and easy to follow instructions.

Scoobypedia | Trusted knowledge for everything Subaru | Knowledge / Reading ECU Fault Codes

Stu

ok cheers for that ,right found them and has given me fault code 31 (throttle position sensor,would that just be a straight forward swap and joc done do you think?