brendy76

iTrader: (6)

As above, My bug needs either a replacement uppipe or header (fumes when cold coming up through the engine bay when the bonnet is open as well as the asociated noise.) what parts of the entire system can I replace before a remap is required and if the cel comes on, other than the actual light coming on, does it run in a failsafe/limp mode?

Midlife......

iTrader: (2)

The question is very dependant on if you have a bug WRX or bug STi.

For the WRX the TD04 turbo isn't a big unit and you can remove and change things at will without a re-map. The ECU will simply compensate

The STi has a bigger VF35 and if you start to de-cat then the improved airflow can cause boost spike problems needing a re-map !!

Shaun

brendy76

iTrader: (6)

I have a WRX, will ant decat work fire up the cel etc?

dynamix

iTrader: (3)

You will get a CEL for decating it but you can change headers and uppipe (and most exhaust parts) without it overboosting too badly. I wouldnt go with tubular headers though - it will make the car very laggy. Changing the up-pipe may bring a CEL on if you fit an uppipe without the EGT sensor.

Why is it you dont want a remap ? It makes a massive difference to a wrx.

JDM_Stig

iTrader: (3)

You can buy a resistor to kill the cell light until you get it mapped if that helps.

brendy76

iTrader: (6)

Itsnot that im not going to remap, it's the stages in which it's being done and finances going on a golf trip, I want to fix the leak first then in the next few month get it remapped but want to make sure I'm not going to suffer performance loses or cause any damage.

brendy76

iTrader: (6)

Would I be better sticking to a set of standard headers for now and just replacing the faulty part with a performance part rather than changing headers also? is there much of a gain from them?

Midlife......

iTrader: (2)

Get an exchange set of ported headers from somebody like harvey........new headers and future proof too Ported headers help with torque, particularly if you go for a bigger turbo later

Shaun

brendy76

iTrader: (6)

Cheers matey. Ill look into it...and check the finances!

brendy76

iTrader: (6)

Thanks for the advice so far guys, I have got a classic uppipe and new gasket waiting to go on and hopefully going from the end of the downpipe to the backbox 2.5" straight through. Mentioned above is the cel being triggered. I have got an obd2 lead and logging software, I can check for errors once it's on but is there any real reason not to do what i plan?