ESL motherboard
09 February 2010, 10:28 PM
#1
BANNED
Thread Starter
Join Date: Nov 2008
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
ESL motherboard
Ok I need some advise I was going to by a ecu off of this chap. but as I am not sure that it was what he said it was I didn't.
The ecu was without a case as he claimed he has put a solaris motherboard in it's place. The motherboard that he was tryin to sell to me was an EPROM Which was live mapped by scoobyclinic.
My question is. Is this an ESL motherboard and is it a re-mappable ecu?
The ecu was without a case as he claimed he has put a solaris motherboard in it's place. The motherboard that he was tryin to sell to me was an EPROM Which was live mapped by scoobyclinic.
My question is. Is this an ESL motherboard and is it a re-mappable ecu?
Last edited by WorkInProgress; 09 February 2010 at 11:08 PM.
09 February 2010, 11:03 PM
#2
Scooby Regular
iTrader: (2)
Join Date: Jul 2007
Location: stoke-on-trent
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
there is an early esl and the later esl live which can be live mapped hope this helps pm clinic or jgm they can help you further 
ps i have esl live fitted at clinic been great can be tweeked for future mods and you keep all factory saftey features knock control fuel/boost cut + more
ps i have esl live fitted at clinic been great can be tweeked for future mods and you keep all factory saftey features knock control fuel/boost cut + more
09 February 2010, 11:17 PM
#3
BANNED
Thread Starter
Join Date: Nov 2008
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
there is an early esl and the later esl live which can be live mapped hope this helps pm clinic or jgm they can help you further
ps i have esl live fitted at clinic been great can be tweeked for future mods and you keep all factory saftey features knock control fuel/boost cut + more
ps i have esl live fitted at clinic been great can be tweeked for future mods and you keep all factory saftey features knock control fuel/boost cut + more
Thanks mate. He has just replied saying that it's a...... And I quote "it's a impreza ecu with a scoobyecu" what's that???
He said it was live mapped at scoobyclinic I'm guessing I need to talk to them really.
What power are you running if you don't mind me asking?
09 February 2010, 11:25 PM
#4
Scooby Regular
iTrader: (2)
Join Date: Jul 2007
Location: stoke-on-trent
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
for scooby ecu questions pm scott t on here he knows all there is to know trust me lol but i am unsure if it live mapped i dont think it is but could be wrong 
mine is an sti 2 wagon with full de-cat ported headers fmic K&N induction (custom piping) new td05 turbo boost set to 1.2bar and it made 301bhp cant remember torque will have to dig my graph out was done about 2 years ago now been great but it did kill my clutch after a month lol still good reason for me rip the box out and fit a later sti one
mine is an sti 2 wagon with full de-cat ported headers fmic K&N induction (custom piping) new td05 turbo boost set to 1.2bar and it made 301bhp cant remember torque will have to dig my graph out was done about 2 years ago now been great but it did kill my clutch after a month lol still good reason for me rip the box out and fit a later sti one
09 February 2010, 11:34 PM
#5
a scooby ecu is a small daughter board built to emulate the 27c1028 chip which was no longer available, to allow the reprogramming of the early v1/2 jecs ecu, people use the esl live board now which allows live mapping of the jecs ecu, nothing wrong with the scoobyecu, but you need to make sure that it is for your mods, it may be worth emailing scooby clinic to see if they can still map them, but by the time you have paid for the board and the remap you are esl prices.
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM