scooby1982

iTrader: (4)

Hi all i am having difficulty in removing the igniton barrell on my 98my uk 2000 i am fitting a new one but need to rmove the old one, i have removed a small screw thats located on the side and one other screw that is located at the far end of the barrell and i cant see any others, am now stuck as i dont know what to do from here on can someone plz help as i would so dearly love to hear my scooby started today and i think this is all thats needed for me to do it helllppp!!!

dj219957

you need to put the key in and i think then it will twist out irrc

scooby1982

iTrader: (4)

i have tried this mate and its not working lol its being a pain in the backside lol!!

dj219957

is there not a little dot that you have to push a pointed object into?
i have done this job before so i know it can be done but cant remeber exsactly how.
i removed mine when the whole unit was off the car. there is a large button under neath which is permanatly pushed into when the unit is fitted to the column so maybee the unit has to be off the column to release the button and the barrel.
the unii is not difficult to remove, even with the two security bolts. just dot punch the bolts on one corner and tap them round with a screw driver.