ebay parallel fuel rails!
#1
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Oct 2009
Location: sheffield my03 sti 600ish/540ish
Posts: 1,445
Likes: 0
Received 0 Likes
on
0 Posts
ebay parallel fuel rails!
i have bought some of these and i must say they are excellent quality and finish there is just one question has anyone fitted some as there are 2 brackets that are self explanetry andone that is a t shape with 3 holes in
#6
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Oct 2009
Location: sheffield my03 sti 600ish/540ish
Posts: 1,445
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#10
Scooby Regular
Join Date: Aug 2005
Location: My turbo blows, air lots of it!!
Posts: 9,073
Likes: 0
Received 0 Likes
on
0 Posts
#13
Scooby Regular
iTrader: (7)
Join Date: Jun 2009
Location: edinburgh
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
thats a mounting bracket , but not for a subaru lol never seen a bracket like that on a scoob but hey its from ebay so what do u expect ? they look good and mostly always do but can they do the damage or actually cause it ?
Last edited by johngoulding; 20 January 2010 at 11:33 PM.
#14
Scooby Regular
Join Date: Aug 2005
Location: My turbo blows, air lots of it!!
Posts: 9,073
Likes: 0
Received 0 Likes
on
0 Posts
If it's not for a Subaru then why sell it as part of the Subaru kit? Going by the pictures the fuel rails are a direct bolt fit to the fannimould so I can't see what the bracket can possibly be for
#15
Scooby Regular
iTrader: (7)
Join Date: Jun 2009
Location: edinburgh
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
because the fuel rails WILL work on a scoob but the brackets i believe are not for a scoob probably the boy just picked up the wrong ones or packed them wrong , its only a bracket mate just change them / make ur own ones , its not hard a drill and a bit of stainless and bobs your uncle , it could also be that they are for a different year than the seller stated but i cant see that , sureley they would just bolt into place of the old fuel rails ??? im sure they do bolt onto the inlet manifold on classics but not sure about 01 onwards it could just be the brackets there because of the angle that those particular fuel rails sit at is a bit different as the hole centres seem ok ? bit like these but without the spacers ,
try taking the bracket off and then see if they fit ???
try taking the bracket off and then see if they fit ???
#18
Scooby Regular
iTrader: (7)
Join Date: Jun 2009
Location: edinburgh
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
the fuel rail brackets come to think of it looking at other cars may be ok but the other bracket i wouldnt worry about until u come to fitting them as u may realise sumthing needs to be moved and more than likely thats what that bracket will be for
#20
Former Sponsor
iTrader: (4)
Join Date: Jul 2003
Location: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Posts: 6,377
Likes: 0
Received 3 Likes
on
3 Posts
That possbly explains it.
David APi
Our new rolling road is ready to roll.
Agents for:
Simtek, the most exciting new Ecu for years
Buddy Club exhausts
Hayward & Scott exhausts
Carbonetics clutches
BC suspension
Samco hose kits
Hybrid front mount intercooler kits
AP Racing brakes and clutches
Performance friction products
And of course; the well known APi Performance Exedy organic clutch
www.apiengines.com
www.apiimpreza.com
01926 614333
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM