MY97/98 ENGINE BAY PIC REQUEST
#1
MY97/98 ENGINE BAY PIC REQUEST
As title.
I'll be fitting a MY97-00 Hyperflow FMIC and also be doing the "turbo intake hose under manifold" mod. I'll be getting a MY97/98 inlet manifold to aid this... and I understand I need the MY97/98 PAS pump/res too - so as to make the intake pipe fit, etc.
Does anyone have pic of either a MY93-96 with this work done (I know loads of you have! lol), or just a pic of a normal MY97/98 engine bay - with or without a FMIC fitted, in either case.
I just need to see what's what and how things look, etc...
Thanks in advance.
I'll be fitting a MY97-00 Hyperflow FMIC and also be doing the "turbo intake hose under manifold" mod. I'll be getting a MY97/98 inlet manifold to aid this... and I understand I need the MY97/98 PAS pump/res too - so as to make the intake pipe fit, etc.
Does anyone have pic of either a MY93-96 with this work done (I know loads of you have! lol), or just a pic of a normal MY97/98 engine bay - with or without a FMIC fitted, in either case.
I just need to see what's what and how things look, etc...
Thanks in advance.
#3
Cheers.
I have a Z32 MAF and RCM fat cone (MY93-96 airbox will be junked) - can the MAF not just fit into the end of turbo hose, without using that second shorter S-shaped hose?
Also, I'm not with my car at the mo - how does the position of the MY97/98 PAS pump/res differ from that of the MY93-96 (I can't envisage it lol)?
I have a Z32 MAF and RCM fat cone (MY93-96 airbox will be junked) - can the MAF not just fit into the end of turbo hose, without using that second shorter S-shaped hose?
Also, I'm not with my car at the mo - how does the position of the MY97/98 PAS pump/res differ from that of the MY93-96 (I can't envisage it lol)?
#4
Former Sponsor
iTrader: (30)
Join Date: Jan 2005
Location: FB Tuning Workshop - HP27
Posts: 4,219
Likes: 0
Received 0 Likes
on
0 Posts
The MAF 'could' be attached to the inlet hose with some silicone hose/reducer if reqd. - If you get the "S" shaped hose from a UK 97/98 turbo, it will fit your Z32.
PS pumps are the same - you could just swap the reservoir bottle, and the later cooler hardpipe if you want, but you'll need to change the return pipe (to the tank) i think
Alternatively, you could convert to the later remote bottle setup, as found on 2001-> cars.
PS pumps are the same - you could just swap the reservoir bottle, and the later cooler hardpipe if you want, but you'll need to change the return pipe (to the tank) i think
Alternatively, you could convert to the later remote bottle setup, as found on 2001-> cars.
#5
I think the Z32 MAF's "intake pipe end" is 80mm. What is the diameter of the MY97/98 turbo intake hose's "MAF end" (not the S hose)?
So If I get the MY97/98 PAS res. bottle it'll fit straight on my exisitng MY93 pump? Or do you have to get the MY97/98 pump/res. as a single assembly and wholesale swap it over?
Or is it simpler to just plump for the New Age one?
Sorry for the questions - this particular area I'm very green on.
So If I get the MY97/98 PAS res. bottle it'll fit straight on my exisitng MY93 pump? Or do you have to get the MY97/98 pump/res. as a single assembly and wholesale swap it over?
Or is it simpler to just plump for the New Age one?
Sorry for the questions - this particular area I'm very green on.
Last edited by joz8968; 07 January 2010 at 12:30 AM.
Trending Topics
#9
Scooby Regular
iTrader: (5)
Join Date: Oct 2006
Location: hatfield
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
My car is a V3 my97 and has FMIC and the turbo intake hose mate. Pic on my for sale thread if any good to you for info:
https://www.scoobynet.com/private-sa...8-r-plate.html
https://www.scoobynet.com/private-sa...8-r-plate.html
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
BlueBlobZA
Member's Gallery
30
25 July 2016 09:14 AM
BHPvstorque
Subaru Parts
4
14 September 2015 08:25 PM