TMIC query
#2
Scooby Regular
Join Date: Nov 2009
Location: plymouth
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
yep.just done this mod on mine.put an 03 wrx i/c onti my uk 97 classic.all had to do was get the pipe for the dump valve wleded to the new i/c as there is no room for new age dump valve as the idle control valve in the way.cost me £44 on ebay for mint i/c and welding was £20.
#4
Scooby Regular
Join Date: Nov 2009
Location: plymouth
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
i also bought new i/c to throttle body silicon hose that was an inch longer so had more room around the dump valve hole on i/c.just gives enough room as pipe for icv is right in the way.all the other year scoobies seem to have a different icv that isnt in the way.
will get some pics on here.
will get some pics on here.
#6
Scooby Regular
Join Date: Nov 2009
Location: plymouth
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
all done at last.
had the outlet pipe for d/v welded onto new i/c:
then good clean and lick of paint:
then cut the new pipe work to size and trial fit i/c:
then make left hand spacer up for mounting point and right hand one just drilled new hole 3/4 inch away from original hole to push bracket out far enough to clear side of i/c.then just bolt up.
had no clearance issues underneath and just got to get under tray for bonnet to make most of extra size.
had the outlet pipe for d/v welded onto new i/c:
then good clean and lick of paint:
then cut the new pipe work to size and trial fit i/c:
then make left hand spacer up for mounting point and right hand one just drilled new hole 3/4 inch away from original hole to push bracket out far enough to clear side of i/c.then just bolt up.
had no clearance issues underneath and just got to get under tray for bonnet to make most of extra size.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM