inlet manifold and fuel rails
#1
inlet manifold and fuel rails
im gonna atempt to build up my inlet manifold today.
now i have got myself 5m of 8mm braided hoses and fixings to match
i also my fuel rails and injectors
do i need anything else
now i have got myself 5m of 8mm braided hoses and fixings to match
i also my fuel rails and injectors
do i need anything else
#3
Scooby Regular
iTrader: (23)
Masking tape to wrap around the hose end to prevent braids becoming loose...always cut through the middle of the masking tape.
A Hose swager opens the hose to slip onto the fittings remember to put some of that Vas on the end of the fitting or inside of the hose before slippign on and some vaseline/petroleum jelly for the orings on the injectors as well.
A Hose swager opens the hose to slip onto the fittings remember to put some of that Vas on the end of the fitting or inside of the hose before slippign on and some vaseline/petroleum jelly for the orings on the injectors as well.
#4
thanks i need to get some new fixing first as the ones i have are wrong
pictures are to follow when i start. but they will be in my project thread.
don't think i can start untill after xmas. unless i can find somewhere that has them on the shelf
any suggestions?
pictures are to follow when i start. but they will be in my project thread.
don't think i can start untill after xmas. unless i can find somewhere that has them on the shelf
any suggestions?
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM