im gonna atempt to build up my inlet manifold today.

now i have got myself 5m of 8mm braided hoses and fixings to match
i also my fuel rails and injectors

do i need anything else

 

When you do it mate take some pics....quite a few people have asked on how to do these in the past so may help some people out. Good luck

 

Masking tape to wrap around the hose end to prevent braids becoming loose...always cut through the middle of the masking tape.

A Hose swager opens the hose to slip onto the fittings remember to put some of that Vas on the end of the fitting or inside of the hose before slippign on and some vaseline/petroleum jelly for the orings on the injectors as well.

 

thanks i need to get some new fixing first as the ones i have are wrong
pictures are to follow when i start. but they will be in my project thread.

don't think i can start untill after xmas. unless i can find somewhere that has them on the shelf

any suggestions?