Ignition Barrel change
09 December 2009, 09:13 PM
#1
Scooby Newbie
Thread Starter
Join Date: Dec 2009
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Ignition Barrel change
After some thieving ****** stole my keys after my house was broken into, I need to change the locks on my impreza WRX 1994.
Ive done the door locks but cant work out how the hell you get the ignition barrel out without disturbing/drilling the whole steering lock.
Surely you must be able to remove it wothout drilling!
Plus I dont have a key for it!
Cheers
Ive done the door locks but cant work out how the hell you get the ignition barrel out without disturbing/drilling the whole steering lock.
Surely you must be able to remove it wothout drilling!
Plus I dont have a key for it!
Cheers
09 December 2009, 10:25 PM
#2
the barrel is fitted with shear bolts
basically when they are tightened up the head then snaps off stopping it just being undone again,so you need to use a small chisel or punch and tap the bolts back round to undo them
thats the 1st stage
if the steering lock is on,i cant remember what i did then (i took a barrel from a scrapped impreza to fit to mine)
good luck
basically when they are tightened up the head then snaps off stopping it just being undone again,so you need to use a small chisel or punch and tap the bolts back round to undo them
thats the 1st stage
if the steering lock is on,i cant remember what i did then (i took a barrel from a scrapped impreza to fit to mine)
good luck
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM