Problem: Defi EGT sensor to psi3 data monitor
#1
Problem: Defi EGT sensor to psi3 data monitor
I try to connect a Defi EGT sensor in the VFD psi3 data monitor but does not appear they collaborate! knows somebody relatively...
The EGT sensor seems ok its brand new and I measured his electric resistance and it is ok. The monitor is the most likely to have the problem because it is turned on and i set that the EGT is fitted and i get not right figures...EGT temperature always jumping for 50 degrees to 150 and back again...while engine is working in many different rpm!
Please some help!!
The EGT sensor seems ok its brand new and I measured his electric resistance and it is ok. The monitor is the most likely to have the problem because it is turned on and i set that the EGT is fitted and i get not right figures...EGT temperature always jumping for 50 degrees to 150 and back again...while engine is working in many different rpm!
Please some help!!
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM