Ste RB5138

I was wondering which is the best way to reset the ECU, by disconnecting the battery for an hour, or by connecting the black & green connectors under the steering wheel as it says on the JGM website?

JollyGreenMonster.co.uk

Or do both ways work fine?

ariser

Connectors is quicker, battery reset has to be disconnected for half a day or something from memory. When you disconnect battery pump brake pedal a few times to get rid of any stored charge in car.

syndrome1

I took the lower part of my steering column shroud off and I can't see any connectors am I looking in the right place?

Glowplug

iTrader: (8)

As said above connectors are quicker



Yeah your in the right place Shouldn't need to remove the plastic they can usually be accessed easily by looking up and under, they may be taped away if they hhave not been used before

ariser

mine were stuck way up high under steering column. Took taking that front lower dashboard cover and a torch to find them but i made them more accessible now

D4VEW557

mine were taped to the harness just to the right of the heater box/ direction motor.

was hard to get to with the panel on.