Roger.m.

hi peeps has anyone got the small pipe thats connected to the actuator on the turbo. its a small black pipe id say about 8mm thick and say 50mm long mine seems to be split where it pushes onto the actuator. its a 97 uk classic so i assume its a td04 turbo.i will pay postage if anyone has one or two kicking about cheers Roger. ps. it doesnt seem to have affected my car yet.

can this hose be bought from halfords etc. and does anyone know what size. also what would happen if it splits completely

Glowplug

iTrader: (8)

Can you not nip the end off and re-attatch??

Second option is to buy some silicone hose from samco or simular!

If that hose fails then the car could effectivly boost to destuction, beware!!

Roger.m.

http://www.halfords.com/webapp/wcs/s...Id_165746#dtab


would some of this be ok.

burbling1

iTrader: (1)

I wouldnt as thats fuel hose, may not be any different but... I have bought this stuff before and had no problems with it, normally next day delivery.
I think you will need the 5mm.


Drifting Car Parts | Drift Videos and DVDs | Drift Clothing

Glowplug

iTrader: (8)

Yeah, that'll do it.

Roger.m.

cheers guys i went to prosport today and they had some blue silicone hose in the bin. but there is a little brass boost valve that goes in the pipe which i didnt know about and threw away so i had to order one aswell .

burbling1

iTrader: (1)

Think you will have a 2 port solenoid and the brass restrictor goes in the pipe between the turbo and the t piece.

Roger.m.

put new hose and restrictor on, made a lot of difference pulls a lot better now, my smile is massive again.