Check engine light has come up on my scoob a few weeks back and I've just managed to find out what the problems were

BIG THANK YOU to jollygreenmonster's website for the error codes. I was starting to run out of ideas to find no.45

the error which has confused me is no.45 which I understand to be a pressure sensor / pressure exchange solenoid valve

Can some 1 please shed some light on this who knows what they're on about. I'm a little to what it is and what can be done to solve it.

The other 1 was 22 which is knock sensor which seems to be faulty so I'm going to replace that.

Cheers Phil

 

MAP sensor

https://www.scoobynet.com/general-te...code-45-a.html

Knock sensor may not be faulty as many of these sensors going wrong can lead to other error codes being brought up

 

thanks very much.

I'm going to look now and find a replacement.

Does the fact that I have bypassed the boost control solenoid with a electronic boost controller hinder this fault or is it just the part broken.

Thank you

 

tbh just reset the ecu before buying/changing anything.
It most probably is knackered and bypassing the boost solenoid doesn't cause the fault.