MORE POWER
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Feb 2008
Posts: 470
Likes: 0
Received 0 Likes
on
0 Posts
MORE POWER
Ok Guys
i got a my05 wrx, i and to get more power like fitting a PPP pack ,,, but the cost £1800 ouch , any one got any ideas or know were i can get remap and parts cheaper , or have an better and cheaper way to get more out of her ,
thanks beanys
i got a my05 wrx, i and to get more power like fitting a PPP pack ,,, but the cost £1800 ouch , any one got any ideas or know were i can get remap and parts cheaper , or have an better and cheaper way to get more out of her ,
thanks beanys
#3
Scooby Regular
iTrader: (1)
Join Date: Apr 2009
Location: Chesterfield, UK
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
yeh tahts best way mate, new panel, full decat and remap... you MIGHT want to spend an extra few quid and uprate the fuel pump while your at it? the most expensive part of it is the remap so if ur running a bit skint just fully decat and panel filter it (Green is probably the best panel filter if u want to stick with OEM filter box...) or get a cold-air induction kit....
just remember tho.....if you decat and get a roadside emmissions check... *gulp* lol, might be worth getting the up pipe cat (2nd cat on the newage) removed and put a sports cat in, but they cost more than a decat and might not get to 280..... just a thought
just remember tho.....if you decat and get a roadside emmissions check... *gulp* lol, might be worth getting the up pipe cat (2nd cat on the newage) removed and put a sports cat in, but they cost more than a decat and might not get to 280..... just a thought
#4
Scooby Regular
iTrader: (11)
personally i wouldnt decat if your not going to remap, especially if you decat the up pipe aswell.. without a remap you will probably experience over boost..and your fueling will be all over the place.. plus you wont get the full potential out of your car without remapping.
fitting a induction kit definatly requires mapping
fitting a induction kit definatly requires mapping
#7
Scooby Regular
iTrader: (1)
Join Date: Apr 2009
Location: Chesterfield, UK
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
hahaha, my poor CC gets a bashing!!! if your not confident doing stuff yourself, and tbf, fitting a decat is a bit tricky without high rise jacks.... ur not far from ScoobyClinic mate, and ScoobyWorld.... give um a ring n see what they say.... tbf, you see ALOT of scoobs with scoobyclinic decals on the stickers so they must be doing something right :-)
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM