I've noticed when breaking the car is juddering when I'm trying to come to a stand still, any ideas on how to resolve this?

Cheers

Mike

 

yes mate dead easy , get yourself a new set of brake discs as yours are more than likely warped and it may also be in your best interest to fit new pads at the same time.

 

new discs, sound like ther warped.

 

Told ya.

 

you must have new pads with new discs only a fool would not

 

Fit either DS2500 or performance friction pads mate , you wont go wrong.

 

or get some decent stoppers with floating discs and bells. you know it makes sense its the only thing between you and the corner

 

That happend to me as well,.. Gave CRN PERFORMANCE a ring,.. I found them on EBAY Iv got a 1994 wrx import,.. £170.00 for 4x drilled and grooved discs,.. And mintex pads all round inc delivery.. Just about bedded in,.. Quite impressed tho!

 

'Warped' discs are probably bad material stuck to the disc, this is what I found recently after forking out for new stuff. Give them a clean up and see if that works first.

 

Discs and pads it is then - thanks for the info. The ABS light is coming on when the cars in motion too, I assume it's possibly one of the sensors.

I'll clean the sensors up and check with multimeter as I swap each set of discs\pads. Whats best to use for cleaning the connectors?

Thanks

 

Isn't there a flash code diagnostic for the abs system like the engine one?

 

the abs could make it judder to, id try the sensors and abs ring to see if there damaged before shelling out on new discs and pads

 

Ok. I'm going to take the wheels off later this afternoon and have a look at these sensors. Can anyone tell me exactly what I can check for the ABS i.e. location of sensors, check for certain voltage etc?