will a 96 baileys dv fit a 97 version 3?
06 September 2009, 05:14 PM
#1
Scooby Regular
Thread Starter
Join Date: May 2009
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
will a 96 baileys dv fit a 97 version 3?
ive been told the actual valve will but the fitting kit is different.. please can some 1 clear me on this as not sure as i know 97 is when the intercoolers changed to the non slanted ones (my one). 
06 September 2009, 05:43 PM
#2
The early MY93-96 DV ports' O.D. is 19/20mm from memory, and the MY97/98 ones are 32 or 34mm(?), so I'm assuming the 90deg DV elbow on the MY97 IC measures 32 or 34mm too? Measure the O.D. of the the elbow to be sure which dia. it is...
If so, you'll simply need a 32 (or 34mm)-to-20mm silicone reducer hose to fit the Bailey to to the IC.
And don't forget to plug the turbo intake pipe's recirc port with a 32 or 34mm bung too.
If so, you'll simply need a 32 (or 34mm)-to-20mm silicone reducer hose to fit the Bailey to to the IC.
And don't forget to plug the turbo intake pipe's recirc port with a 32 or 34mm bung too.
Last edited by joz8968; 06 September 2009 at 05:47 PM.
06 September 2009, 06:42 PM
#3
Scooby Regular
Thread Starter
Join Date: May 2009
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
hi mate i already got a bung so thats ok, the reason im asking is i am looking for a baileys for my 97 ver 3 but seem to only see ones from 95's and 96's on ebay. So basically it should be fine with one of these?
Thread
Thread Starter
Forum
Replies
Last Post
aaron_ions
General Technical
17
03 November 2021 11:07 AM