hi all i bought my r reg uk impreza turbo with no engine,so as you can see i have fitted a new engine and turbo,she starts fine but will not boost,i think its due to getting the hoses wrong from the map senser/boost selonoid to the turbo and the atchator and dump valve and inlet manafold








Any pics or help it is doing my head in,i have tryed looking for links but no look thanks all

 

See here:-

Boost Solenoid Plumbing

- Vac line to top port should come from the compressor nipple

- Vac line from middle port goes to wastegate actuator

- Bottom port is recirc'd upstream of the MAF into the intake somewhere e.g. tapped into the side of your K&N res. delete pipe... or the turbo intake hose... or just simply left hanging to vent in the bay

Please note that this bottom port's hose should have the brass restrictor pill in it!!!

 

thank you very much i will get the done in the morning,whats the pill look like as i dont think it has one on thanks

 

can you help me with this to were do they go


and this to

 

any one i need help asap