KINGHORN

iTrader: (1)

hope sopmeone can help, i have a 2002 sti running 415 at the moment but im restriceted because of the maf tube size, been told by andy forrest to upgrade to an 80mm tube as all my other pipework is 80mm but cant fid one anywhere

WUZ

iTrader: (14)

Any use to you? close enough to 80mm to work?

3" MAF tube for WRX/STi

TimH

iTrader: (11)

Not sure what induction etc you have, but Roger Clarke do an 80mm induction kit with a huge K&N cone filter.

You need to fit it - or any 80mm MAF tube - immediately prior to mapping. Do not drive it until mapped, as I know to my cost!

KINGHORN

iTrader: (1)

I HAVE the roger clarke one but its no use there is no where for it to go so sending it back, so i also need a new induction kit.

WUZ Andy says i idealy need an 80mm one.

TimH

iTrader: (11)

Out of interest, why does it not fit?

KINGHORN

iTrader: (1)

its huge, if you imagine the end of the cone on the inner wing the end of the trumpet is past the intake pipe, and there is no mount for a MAF on it.

TimH

iTrader: (11)

Must be different to my one then?

Bob Rawle

They sent you th wrong one, contact and tell them you are running the oem ecu and you need the "short" filter to go with the maf version, also they should supply you the Samco pipe (extra cost) as this is crucial to the install and getting the car sorted out in respect of scaling etc.

cheers

bob

KINGHORN

iTrader: (1)

AH OK, i already have the 80mm samco afta maf pipe, so im ok there, il send it back ASAP cheers

KINGHORN

iTrader: (1)

i cant seem to find the 80mm one on the RC site, i have found the one they sent me and its the Gobstopper one 260mm long with 100mm trumpet

TimH

iTrader: (11)

It's a special they did for Bob Rawle, probably best you give them a call.

KINGHORN

iTrader: (1)

AH ok thanks for the reply guys hopefully i can get this sorted and get the car to produce the power it should

KINGHORN

iTrader: (1)

anyone got any other 80mm induction kit options??

joz8968

iTrader: (13)

Presumably, RCM sent you this one, right?:-

Roger Clark Motorsport - RCM Product Detail



But you prob need this one?:-

Roger Clark Motorsport - RCM Product Detail

It looks like the same one in tim's pic, so hopefully will fit in the available space.

(I think this is what Bob is getting at(?))

TimH

iTrader: (11)

Can't RCM supply one like mine then? I'm sure they still do it.

joz8968

iTrader: (13)

Tim, is your kit this?:-

Roger Clark Motorsport - RCM Product Detail

Roger Clark Motorsport - RCM Product Detail

KINGHORN

iTrader: (1)

im not sure they havent got back to me yet

TimH

iTrader: (11)

No - the filter looks the same, but the trumpet is not right as it does not have the MAF flange.

I bought mine second hand, so don't know the part number I'm afraid.

joz8968

iTrader: (13)

Oops stupid me.

Yours is this one isn't it?:-

Roger Clark Motorsport - RCM Product Detail

This should be what the OP needs too, yes?

KINGHORN

iTrader: (1)

yeah basicaly need that but it doesnt say if its 80mm or not

joz8968

iTrader: (13)

Ring 'em!

Olly's extremely helpful over the phone and will tell you all you need to know, etc...

TimH

iTrader: (11)

No, that's still not the right one, as it's not 80mm. As already suggested bu others, I really recommend you phone them.

joz8968

iTrader: (13)

I'll get me coat.

At least that answers the OP's question as far as that particular item goes.

KINGHORN

iTrader: (1)

CHEERS LADS WILL phone them on monday

Davey P

iTrader: (1)

I've got the bigger MAF pipe, plus MAF housing and RCM induction for sale if your interested.

PM me for more details.