TURBO TIMER WIRING GUIDE
#1
Scooby Regular
Thread Starter
Join Date: Oct 2008
Location: aberdeen
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
TURBO TIMER WIRING GUIDE
Hi guys after scouring this site for a wiring diagram to help us fit a turbo timer i realised that there were no threads to tell us (that i could see)
i eventually got it all done and wired up so heres what i found
Wires from the ignition barrel are:-
Black+white
Black
Black+yellow
Black+blue
Black + white = 12v positve - Red wire in timer
Black wire = 12v positive (ignition) yellow wire in timer
Black+blue = 12v positive (accesories) blue wire in timer
after connecting wires connect Black wire to the body or 'ground'
and your done
hope this helps
Allan
i eventually got it all done and wired up so heres what i found
Wires from the ignition barrel are:-
Black+white
Black
Black+yellow
Black+blue
Black + white = 12v positve - Red wire in timer
Black wire = 12v positive (ignition) yellow wire in timer
Black+blue = 12v positive (accesories) blue wire in timer
after connecting wires connect Black wire to the body or 'ground'
and your done
hope this helps
Allan
Last edited by kingalzer; 22 August 2009 at 03:25 PM.
#2
Scooby Regular
iTrader: (13)
Hi guys after scouring this site for a wiring diagram to help us fit a turbo timer i realised that there were no threads to tell us (that i could see)
i eventually got it all done and wired up so heres what i found
Wires from the ignition barrel are:-
Black+white
Black
Black+yellow
Black+blue
Black + white = 12v positve - Red wire in timer
Black + yellow wire = 12v positive (ignition) yellow wire in timer
Black+blue = 12v positive (accesories) blue wire in timer
after connecting wires connect Black wire to the body or 'ground'
and your done
hope this helps
Allan
i eventually got it all done and wired up so heres what i found
Wires from the ignition barrel are:-
Black+white
Black
Black+yellow
Black+blue
Black + white = 12v positve - Red wire in timer
Black + yellow wire = 12v positive (ignition) yellow wire in timer
Black+blue = 12v positive (accesories) blue wire in timer
after connecting wires connect Black wire to the body or 'ground'
and your done
hope this helps
Allan
Thread
Thread Starter
Forum
Replies
Last Post
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM