New Up pipe advice
#1
New Up pipe advice
Hey all,
Going to fit a new up-pipe on my 03 WRX, are these any good??
IMPREZA TURBO UP PIPE EXHAUST SCORPION NEW AGE SHAPE on eBay (end time 20-Aug-09 15:45:01 BST)
or
Subaru (New shape) decat Turbo Up Pipe on eBay (end time 17-Aug-09 09:44:52 BST)
Are they a B*tch to fit?
I have been told that when the cat on the up-pipe degrades it can suck the bits of the cat back into the engine = engine rebuild time ?
Cheers All
Going to fit a new up-pipe on my 03 WRX, are these any good??
IMPREZA TURBO UP PIPE EXHAUST SCORPION NEW AGE SHAPE on eBay (end time 20-Aug-09 15:45:01 BST)
or
Subaru (New shape) decat Turbo Up Pipe on eBay (end time 17-Aug-09 09:44:52 BST)
Are they a B*tch to fit?
I have been told that when the cat on the up-pipe degrades it can suck the bits of the cat back into the engine = engine rebuild time ?
Cheers All
Last edited by Mr. WRX; 31 July 2009 at 03:52 PM.
#2
the first one is better as it is slip jointed, the flexible joint in the second one is a weak point, cheaper option is to pick up a used classic or newage sti pipe. it can be a bit difficult to fit dependant upon how good you are with car repairs and how difficult the bolts are to remove. Also ensure you get a Lambda socket so you can remove it without damage as they are expensive if you damage them, also a resister will be needed to disable the egt sensor, or if going for a map the cel will be disabled anyway.
#3
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
Try and find a 2nd hand STI part.
1. is too expensive.
2. is likely to fail, don't buy it.
IMHO
dunx
P.S. They can also get partially blocked, strangling the engine.
1. is too expensive.
2. is likely to fail, don't buy it.
IMHO
dunx
P.S. They can also get partially blocked, strangling the engine.
#4
Speak to harvey to sort an up-pipe for you car.
https://www.scoobynet.com/private-sa...lt-flange.html
https://www.scoobynet.com/private-sa...lt-flange.html
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
hedgecutter
General Technical
3
25 September 2015 02:35 PM